At scan time, we'll resolve each asset tag that you've specified in the scan target to IP addresses in your account and to scanner appliances in your account.
For example:
Tag1 = 10.10.10.10-10.10.10.20 and Scanner1
Tag2 = 10.10.10.25-10.10.10.30 and Scanner2
If you specify Tag1 and Tag2 for your scan, we'll use Scanner1 to scan 10.10.10.10-10.10.10.20 and Scanner2 to scan 10.10.10.25-10.10.10.30.
You must choose IP Network Range tags for the scan target. These are tags defined with IP address rules. All other tags will be ignored.
Let's say Tag1 is part of Network1 and Tag2 is part of Network2. If you select Network1 and specify Tag1 and Tag2, we'll scan 10.10.10.10-10.10.10.20 using Scanner1. We'll ignore 10.10.10.25-10.10.10.30 and Scanner2 because they are not part of the selected network.
If you specify a tag that is not assigned to a scanner appliance you will get an error and your scan will not launch. Make sure all tags in your scan target are assigned to scanner appliances or choose a different scanner appliance option.
It's easy to do. Go to Scans > Appliances, edit the scanner appliance you're interested in, and select one or more tags for the appliance.